- Forward / reverse selector: r reverse action enables easy withdrawal of auger
- Accelerator lever: fitted with safety switch to prevent accidental operation
- Centrifugal clutch: when engine runs at ‘tick over’ speed the drill bit is stationary
- Operating handle: will rotate through 90° for operator comfort
- Safety guard: provides effective, total protection of the drill bit
- Emergency lever: for the immediate release of the drill bit.
- Shock absorbers: fitted between the drive shaft and spindle, reduce the transmission of machine vibrations to the operator.
- Depth gauge: easy to operate for adjusting depth of drilled hole.
- MND & MND1 spindles: automatically secure drill bits up to 16mm
- Guard nozzle: Interchangeable, Guard Nozzle TPM200-26, for locating into chairs and base plates, as commonly used on existing tracks.
- Motor has low emission value complying with ‘Phase 2’ of the European Directive
